|
|
Assistant Professor Doctor of Mechanical Engineering (Automotive Engineering) in the Department of Mechanical Engineering - University of Military Technical College, MTC. & Head of Mechatronics Department of Alexandria Institute of Technology.
|
| Address : Smouha, Alexandria 21311, Alexandria, Egypt. |
Phone: 20-3-425 4370/80.
Fax : 20-3-4254942.
|
Email(s): shafik.elbahnasy@aiet.edu.eg shafiksleem@gmail.com |
| Home Page : http://www.aiet.edu.eg |
|
| EDUCATION |
| Degrees: |
1- Doctor of Philosophy Degree (Ph.D.) in Mechanical Engineering, 1992. Cairo University, Egypt., Thesis:"Experimental and Theoretical study of Liquid Fuel Atomization and Ignition Behind Shock Wave". |
|
2- Master of Science Degree (M.Sc.) in Mechanical Engineering ( Thermo-Fluid) , 1984. University of Cairo, Egypt.Thesis: "Thermal Delay period of Multi-Grade Fules". |
|
3- Higher Diploma in Mechanical Engineering 1978 (Internal Combustion Engines and Lubrication & Design of cooling and lubrication system), Cairo University, Egypt. |
|
4- Bachelor of Science Degree (B.Sc.) in Mechanical Engineering ( Automotive Engineering), 1973. University of Military Technical College, MTC. |
|
| POSITIONS HELD |
| * |
2005- Present : Assistant Professor in Alexandria Institute of Technology,AIT,Samoha,Alexandria,Egypt. |
|
|
| * |
2004- 2005 :Head of Basic Science Department , Higher Institute of Civil and Architectural Engineering, 15th May,City, Cairo, Egypt. |
|
| * |
2003-2004 : Head of Mechanical Department, Faculty of Engineering, Omar AL-Mokhtar University, AL_Bedda,Libya. |
|
| * |
2000-2002: Head of Mechanical Department, Garyounis University, Faculty of Engineering,
Benghazi- Libya. |
|
| * |
1993-1994: Adjunct doctor, higher technological institute,10th Ramadan,Egypt. |
|
| * |
1994-2000: Staff member, mechanical department, Faculty of engineering, Garyounis University, Benghazi,Libya. |
|
| * |
1973-1993: Research engineer, military technical research centre, Red mountain,Cairo, Egypt. |
|
| PRESENT RESEARCH INTERESTS: |
| * |
Combustion characteristics of green fuels (bio-fuels),Zero emission engines (hydrogen engines) , Fuel-cells as power generation techniques & pilot injection diesel fuel engines. |
|
| TEACHING, RESEARCH AND EDUCATIONAL EXPERIENCE: |
| Courses taught. |
| Undergraduate: |
| * |
Theory and design of internal combustion engines, Thermodynamics and its applications, Steam and gas power stations, Heat and mass transfer, Renewable energy,Pollution control,Refrigeration and air conditioning, Automotive engineering, Fluid mechanics and turbo machinery,Fine electro-mechanical measurements,Engineering mechanics,Engineering drawing and graphics and Machine design(stress anaysis). |
| Graduate: (Optional) |
| * |
Advanced compustion,advanced thermodynamics,state of the art of electro-mechanical measurement techniques for grauate stutents ( MSc Courses ) in Faculty of Engineering,Garyounis University. |
| Other educational and research activities:: |
| * |
pilot injection diesel fuel, performance of SIE fuelled with gasoline and natural gas fuels,prediction of flow pattern characteristics of centrifugal compressor using 3- D quasi-orthognal centre line curvature technique,study the effect of diesel fuel dilution with water in reducing NOx emission,prediction of fuel spray characteristics of non-coventional bio-fuel.
Paper reviewer in journal of researcher, university of sabha,libya, Member in promotion committee for asista professor degree,libya and Supervision for establishing 11 mechanical laboratories in mechanical department,Oma al-mokhta university,libya. |
|
| CURRENT PROFESSIONAL SOCIETY MEMBERSHIPS: |
| * |
Member of The Engineering Syndicate,Egypt, Member of ILASS-EGYPT for ATOMIZATION and SPRAY SYSTEM, Member of Scientific International journal of ATOMIZATION AND SPRAY SYSTEM, Member of Egyptian Combustion Committee, Cairo University, Egypt, Member of Technical Research Egyptian-Romanian Delegate and Member of Research Egyptian-Spanish Delegate. |
|
| ATTENDANCE OF CONFERENCES: |
| * |
11 Conferences and symposia in total. |
|
| PUBLICATIONS: |
Basics and Fundamentals in Thermodynamics and Applications. |
18 Papers in total
1 Book.
( Choose 10 papers) |
| Examples: |
|
Papers |
| 1 |
Shafik M.El-Bahnasy ," Design of Solar Energy Battery Charger", J.Science and Technology, University of Science and Technology, Sanaa,Yamen, ISSN: 1607-2073,vol.6,N0.1,2001. |
|
| 2 |
Shafik M.EL-Bahnasy," An Inexpensive Method of Generating Uniform Motion" , Scientific Bulletin ,Part III: Mechanical Engineering and Physics & Mathematics, Ain Shams University, Faculty of Engineering, vol.37,N0.1, March 31,2002. |
|
| 3 |
Shafik M.EL-Bahnassy and R.VENKATACHALAM," A Hydro-Electro- magnetic Auto Sun Tracking Mechanism",Al-Azhar Engineering 6th International Conference,vol.7,Mechanical Engineering,2000. |
|
| 4 |
Torki,A and EL-Bahnasy,SH,M.," Natural Convection in Vertical Annulus Through Porous Material of Variable Permeability", AL-Azhar Engineering 7th International Conference , Cairo,7-10 April,2003. |
|
| 5 |
EL-Bahnasy ,Shafik,M., Hanafy,M., and EL-Fetori,A.,," Prediction of The Natural Gas Combustion Pollutants Emission Levels", RETBE'04,Alexandria University, Faculty of Engineering,11-13, Dec.2004 |
|
| 6 |
EL-Bahnasy, Shafik,M.,"Prediction of Hybrid Flat Plate Solar Collector Characterization in Libya", AL-Azhar 8th International Engineering Conference, Cairo,25-27,Dec.2004. |
|
| 7 |
EL-Bahnasy, Shafik,M.,"Prediction of Hybrid Flat Plate Solar Collector Characterization in Libya", AL-Azhar 8th International Engineering Conference, Cairo,25-27,Dec.2004. |
|
| 8 |
EL-Bahnasy,SH.M. " Effect of Pilot Injection Diesel Fuel on Dual Fuel Engine Characteristics", J.Gas Turbine and Power,ASME, under review,2005 |
|
| 9 |
EL-Bahnasy, SH.M., "Comparison between Performance of thevEngine Fuelled with Gasoline and Natural Gas", J.Automobile Engineering, SAE, Part D:, under revision,2005. |
|
| 10 |
El-Bahnasy, SH.M., "Prediction of Centrifugal Compressor Impeller Flow Pattern Parameters Using 3-D Quasi-Orthognal Stream Line Curvature Technique", 2nd International Conference in Advances of Engineering and Tecnology, 12-14 Nov., 2005. |
|
|
